Maintenance
Tyre pressure by registration: can you check it free?
There is no free official DVLA tyre pressure check by registration. Use the door sticker or handbook for exact PSI/bar, or a make/model checker for typical cold figures.
- Time:
- 2 minutes to understand
- Level:
- Beginner
Before you start
People search “tyre pressure by reg” and “tyre pressure check free by reg” because number-plate tools exist for tax and MOT. Tyre pressures do not work that way. DVLA does not publish a free PSI database keyed to your registration. The legal source of truth is the sticker on the car — or the handbook table for that wheel size and load.
What you’ll need
- Registration only if you want MOT/tax history — it will not return PSI
- Door-shut or fuel-flap tyre pressure sticker
- Gauge or forecourt compressor
- Optional: MotorTools tyre pressure checker by make and model
Step-by-step guide
- 1
Ignore ads that promise “official tyre pressure by registration” without the car in front of you. There is no free DVLA PSI-by-plate service like “check vehicle tax”.
- 2
Open the driver’s door and read the B-pillar / door-shut sticker (or the fuel flap). Note normal load vs full load, and front vs rear.
- 3
If the sticker is missing or unreadable, use the handbook — or look up a typical cold range by make and model at /tools/tyre-pressure, then confirm on a replacement sticker or dealer printout.
- 4
Check pressures cold. Set the gauge to the sticker unit (PSI or bar). Do not use the large number moulded on the tyre sidewall.
- 5
Want a walkthrough of the gauge job itself? Follow /guides/check-tyre-pressure.
What to check
- Same model can have different wheel sizes — the sticker lists more than one table. Match your tyre size.
- Full-load figures are for passengers + luggage, not “always run hard”.
- TPMS is a warning system, not a substitute for a monthly gauge check.
Pro tips
- GOV.UK vehicle enquiry / MOT history by reg is real and useful — for tax, MOT and keepers, not for PSI.
- Aftermarket “by reg” tyre sites are usually guessing from a model database. Treat them like our checker: typical figures, sticker wins.
- EV and performance cars often run higher pressures — never copy a mate’s Fiesta settings onto a Model 3.
FAQs
Can I check tyre pressure by registration for free in the UK?
Not via an official DVLA plate lookup that returns PSI. Free and accurate means reading the sticker on that car. Make/model tools give typical ranges only.
Why do tax and MOT work by reg but tyre pressure does not?
Tax and MOT status are held on national databases against the registration. Recommended cold tyre pressures are a manufacturer setting for wheel size and load — printed on the vehicle, not issued as a DVLA field.
What if my door sticker is missing?
Check the handbook, the other door, or the fuel flap. A dealer or tyre shop can usually print the table from the VIN. Use /tools/tyre-pressure only as a temporary typical range.
Is a tyre pressure checker by model good enough?
Good enough to stop you using the sidewall maximum. Not good enough to override a readable factory sticker.
Safety first
Driving on a soft or overloaded tyre at speed is dangerous. If the sidewall is damaged, stop and replace the tyre — do not keep topping it up from a guessed PSI.